Reinforced concrete joints - List of Manufacturers, Suppliers, Companies and Products

Reinforced concrete joints Product List

1～10 item / All 10 items

Displayed results
Reinforced Steel Joint "EP Joint"

Reinforced Steel Joint "EP Joint"

Since it uses a two-component cartridge, there's no need for mixing! It is less affected by weather conditions and supports shortening construction time.

The "EP Joint" is a rebar joint that does not require a lock nut, allowing for speedy construction. It is a type that injects an organic grout with excellent workability. It uses a two-component cartridge, and the components are mixed inside the static mixer during the two-component discharge, eliminating the need for manual mixing. No skilled workers or craftsmen are required; anyone who has completed the training course can perform the installation. 【Features】 ■ Minimizes the impact of weather and supports shortening of construction time ■ Supports improved work efficiency using easy-to-handle tools ■ No skilled workers or craftsmen are needed; anyone who has completed the training course can perform the installation ■ Allows for speedy construction as it does not require a lock nut ■ Injects "organic grout (epoxy resin)" with excellent workability *For more details, please refer to the PDF document or feel free to contact us.

  • Fittings
  • Steel bar construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction method: Mechanical rebar joint [EG joint (splicing type)]

Construction method: Mechanical rebar joint [EG joint (splicing type)]

Easy installation without the need for grout material! A compact and well-fitting mechanical rebar joint.

The 【EG Joint】 is a mechanical rebar joint that connects rebar ends joined by friction welding with couplers and tightens with lock nuts. It does not require special techniques, allowing for a reduction in construction time. Because it is groutless, temperature management is unnecessary, and no industrial waste is produced. 〇 Obtained the performance evaluation standard for rebar joints【Class A】 in the 2007 edition of the Technical Standards for Structural Design of Buildings (Evaluation Number: BCJ Evaluation-RC 0001-04 by the Japan Architectural Center) 〇 Confirmed the joint performance of the Japan Society of Civil Engineers' "Rebar Anchorage and Joint Guidelines [2007 Edition]" as【Class SA】 【Features】 ○ Sizes D13 to D51, Steel grades SD295 to SD490 ○ Only requires tightening with a torque wrench, no grout material needed ○ Easy installation enables a reduction in construction time ○ Compact design with good fit ○ High reliability as all stress transfer occurs through steel 〇 Can be used as a lightning rod conductor for RC structures 〇 No industrial waste produced as no grout material is used 〇 No ultrasonic inspection required For more details, please contact us or download the catalog.

  • others
  • grout

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mechanical rebar joint [EG cast-in joint (nutless type)]

Mechanical rebar joint [EG cast-in joint (nutless type)]

Easy installation allows for reduced construction time! A mechanical rebar joint born from the trust in friction welding.

The "EG Joint" is a mechanical rebar joint created from the reliability of the deformed bars produced by Godo Steel and friction welding. It allows for easy construction and reduces construction time. 〇 Obtained A-class evaluation according to the performance evaluation standards for rebar joints (Ministry of Construction Notification No. 31) (Japan Architectural Center Evaluation Number: BCJ-RC0538-01) 〇 Confirmed SA-class performance for joint components in the "Guidelines for Rebar Anchorage and Joints [2007 Edition]" by the Japan Society of Civil Engineers 【Features】 ○ Simple installation by just tightening with a torque wrench ○ No grout material required ○ Reduces construction time and labor without the need for special technical skills ○ Compact and well-fitting ○ High structural reliability as all stress transfer occurs through steel 〇 No waste industrial materials generated since no grout material is used * Godo Steel Co., Ltd. and Asahi Kogyo Co., Ltd. established a joint sales company, "Kanto Daybar Steel," in 2019. * For more details, please contact us or download the catalog.

  • grout
  • Concrete Machinery
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mechanical Rebar Coupler 【EG Joint (Standard Type)】

Mechanical Rebar Coupler 【EG Joint (Standard Type)】

No grout material needed for easy installation! A compact and well-fitting mechanical rebar joint.

The 【EG Joint (Standard Type)】 is a mechanical rebar joint that connects screws joined by friction welding at the ends of rebar using a coupler, and tightens a lock nut with a torque wrench for easy installation. Because it is groutless, construction can proceed regardless of weather conditions, leading to shortened construction periods and no generation of industrial waste. 〇 Obtained the performance evaluation standard for rebar joints【Class A】 in the 2007 edition of the Technical Standards Commentary on the Structural Aspects of Buildings ((Foundation) Japan Building Center Evaluation Number: BCJ Evaluation-RC 0001-04) 〇 Confirmed the joint performance of the Civil Engineering Society's "Rebar Anchorage and Joint Guidelines [2007 Edition]" as【Class SA】 【Features】 ○ Sizes D13 to D51, Steel Grades SD295 to SD490 ○ No grout material required, just tighten with a torque wrench ○ Not affected by weather during construction ○ Compact and fits well ○ High reliability as all stress transfer occurs through steel 〇 Can be used as a lightning conductor for RC structures 〇 No industrial waste generated as no grout is used ○ Parts are shipped already attached to the rebar, eliminating material management hassle ※ Can also be used as a construction joint.

  • Steel bar construction
  • Reinforced concrete construction
  • Steel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mortar-filled rebar joint "Slim Sleeve"

Mortar-filled rebar joint "Slim Sleeve"

The ideal form of joints that pursues "ease of construction"! Achieving high performance, high quality, and reduced construction time.

The "Slim Sleeve" is a site-cast mortar-filled rebar joint that contributes to reducing total costs by achieving shortened construction periods and labor savings in various fields of architecture, including RC piles, retaining walls, and reverse curls in civil engineering. By making it thinner and shorter than conventional mortar-filled joints, it has become easier to use. 【Features】 - As a mortar-filled joint, it easily absorbs construction errors. - It can be easily joined even when the rebar cores do not align on site. - Multiple rebars, such as core rebars and multi-layered reinforcement, can be joined with a single touch. - It allows for the joining of rebars fixed at both ends. - The spacing for butt joints of rebars is permissible up to a maximum of 40mm (for construction use). *For more details, please refer to the PDF document or feel free to contact us.

  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mortar-filled rebar joint "Slim Sleeve X Type"

Mortar-filled rebar joint "Slim Sleeve X Type"

We have improved the slim sleeve to maximize "usability" and the range of "applications"!

The "Slim Sleeve X Type" is a high-strength deformed rebar joint that resolves the issue of securing cover thickness, which has been difficult at construction sites due to the reduced outer diameter of the sleeve, thereby expanding its range of applications. With the shorter sleeve length, the number of shear reinforcement bars placed on the sleeve is reduced, significantly decreasing the labor involved in construction and improving work efficiency. 【Features】 ■ Further improved rebar joint for on-site casting, "Slim Sleeve" ■ Even "thinner and shorter" than conventional products, offering excellent usability ■ Covers assembly errors during rebar setup, "erection, setting, cutting" at construction sites by up to 40mm ■ Joint performance comfortably meets Class A standards ■ Achieves shortened construction periods and labor savings across various fields, including architecture and civil engineering ■ Contributes to further reduction in total costs *For more details, please refer to the PDF document or feel free to contact us.

  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mortar-filled rebar joint "Super UX"

Mortar-filled rebar joint "Super UX"

Introducing high-strength deformed rebar joints suitable for precast and cast-in-place construction methods!

"Super UX" is a mortar-filled rebar joint that contributes to shortening construction periods and labor savings with excellent workability that does not require expertise, achieving cost reductions. It can be used in various applications, particularly in areas that require higher reliability unique to SA grade (such as column bases), and it is compatible with both precast and cast-in-place construction, making it widely applicable in both construction and civil engineering. 【Features】 ■ BCJ Evaluation - RC0192-05 ■ Obtained high reliability SA grade ■ Proven safety through three earthquakes: Guam, the Hanshin Awaji Earthquake, and the Great East Japan Earthquake ■ Active in various situations from precast to cast-in-place ■ Excellent workability contributes to shortening construction periods, labor savings, and cost reductions *For more details, please refer to the PDF materials or feel free to contact us.

  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Precast Mortar-Filled Reinforcement Joint 'NXII Type'

Precast Mortar-Filled Reinforcement Joint 'NXII Type'

The joint has been made thinner and shorter, further improving construction performance! Received evaluation as an A-class joint from the Japan Architecture Center (a public interest incorporated foundation).

The "NXII type" is a precast mortar-filled rebar joint that has a narrower and shorter outer diameter while maintaining the same wide inner diameter compared to conventional super UX. It not only improves workability on site but also enhances fit and provides better cost performance. Additionally, two types of mortar are available: the ultra-high-strength mortar "SS Mortar 120N" and the highly workable "SS Mortar," allowing for differentiation based on usage purposes. 【Features】 ■ The joint is made narrower and shorter, further improving construction performance. ■ Differentiation of grout according to purpose is possible. ■ Ensures safety and security while maintaining A-class certified quality. *For more details, please refer to the PDF document or feel free to contact us.

  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforced steel joint "Nutless Joint"

Reinforced steel joint "Nutless Joint"

No need for parts or tools like lock nuts and torque wrenches! Injecting "inorganic grout" with excellent fire resistance.

The "Nutless Joint" is a type of joint primarily used for columns and beams in construction. It is a type that injects inorganic grout with excellent fire resistance. By simply injecting the dedicated inorganic grout, joint performance can be ensured. No parts or tools such as lock nuts or torque wrenches are required, making the assembly work easy, and it can be installed by anyone who has completed the skill training, without the need for skilled workers or craftsmen. 【Features】 ■ Mainly used for columns and beams in construction ■ No need for lock nuts, speeding up the joining process and eliminating the need for tightening management ■ Less affected by weather, supporting shortened construction periods ■ Supports improved work efficiency using easy-to-handle simple tools ■ Can be installed by anyone who has completed the skill training, without the need for skilled workers or craftsmen ■ Injects fire-resistant "inorganic grout" *For more details, please refer to the PDF document or feel free to contact us.

  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mechanical rebar joint 【EG joint (butt joint type)】

Mechanical rebar joint 【EG joint (butt joint type)】

Easy installation without the need for grout material! A compact and well-fitting mechanical rebar joint.

The 【EG Joint (Splice Type)】 is a mechanical rebar joint that connects rebar ends joined by friction welding with screws, using a coupler and tightened with a lock nut. It does not require special skills, allowing for a reduction in construction time. Since it is groutless, temperature management is unnecessary, and there is no industrial waste produced. 〇 Obtained the performance evaluation standard for rebar joints【Grade A】 in the 2007 edition of the Structural Technical Standards for Buildings (Evaluation Number by the Japan Architectural Center: BCJ Evaluation-RC 0001-04) 〇 Confirmed the performance of the joint alone as【Grade SA】 in the "Guidelines for Rebar Anchorage and Joints [2007 Edition]" by the Japan Society of Civil Engineers *For more details, please contact us. 【Features】 ○ Sizes D13 to D51, Steel Grades SD295 to SD490 ○ No grout material needed; just tighten with a torque wrench ○ Easy construction enables a reduction in construction time ○ Compact and fits well ○ High reliability as all stress transfer occurs through steel 〇 Can be used as a lightning rod conductor for RC structures 〇 No industrial waste produced as no grout material is used 〇 No ultrasonic inspection required For more information, please contact us or download the catalog.

  • others
  • grout

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Reinforced concrete joints

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.